《化学制药单元操控》工学结合课程的教学探索

《化学制药单元操控》是一门新开发的将情景教学、实验操作和仿真实训相结合的工学结合课程。其中,引入化工仿真教学这一新型的教学方式,即通过在非常逼真的操作环境中进行技能训练,使学生对实际生产装置有更加感性的了解和认识。本文对《化学制药单元操控》工学结合课程开发与实施应用过程进行分析和总结得到几点经验,同时分享对该门课程教学改革中的一些心得。     

Sleep Disorders Reduce Health-Related Quality of Life in Multiple Sclerosis (Nottingham Health Profile Data in Patients with Multiple Sclerosis)

Quality of Life (QoL) is decreased in multiple sclerosis (MS), but studies about the impact of sleep disorders (SD) on health-related quality of Life (HRQoL) are lacking. From our original cohort, a cross-sectional polysomnographic (PSG) study in consecutive MS patients, we retrospectively analysed the previously unpublished data of the Nottingham Health Profile (NHP). Those MS patients suffering from sleep disorders (n = 49) showed significantly lower HRQoL compared to MS patients without sleep disorders (n = 17). Subsequently, we classified the patients into four subgroups: insomnia (n = 17), restless-legs syndrome, periodic limb movement disorder and SD due to leg pain (n = 24), obstructive sleep apnea (n = 8) and patients without sleep disorder (n = 17). OSA and insomnia patients showed significantly higher NHP values and decreased HRQoL not only for the sleep subscale but also for the “energy” and “emotional” area of the NHP. In addition, OSA patients also showed increased NHP values in the “physical abilities” area. Interestingly, we did not find a correlation between the objective PSG parameters and the subjective sleep items of the NHP. However, this study demonstrates that sleep disorders can reduce HRQoL in MS patients and should be considered as an important confounder in all studies investigating HRQoL in MS.     

“Size effect” in the fatigue behavior of Friction Stir Welded plates

Comparative fatigue tests were carried out on Friction Stir Welded specimens of a 2195-T8 aluminum–lithium alloy that differed significantly in width. The width of the larger specimens was over thirteen times greater than that of the small specimens. Fatigue results showed a clear “size effect”, i.e. fatigue life of large specimens was about 40% of the corresponding value of small specimens. The Equivalent Initial Flaw Size methodology was adopted to correlate the two sets of results. Fatigue crack initiation life was disregarded with respect to crack propagation life, and fatigue life was evaluated only as propagation of a small pre-existing defect. Following this methodology, test results of small specimens were used to evaluate the initial equivalent flaw contained in each specimen. It was assumed that this data followed a normal distribution. The equivalent initial flaw in larger specimens was evaluated by simple geometrical considerations. A very good assessment of mean fatigue life and scatter in the fatigue results of large specimens was obtained by simulating the propagation of these defects. Calculations were carried out by taking also welding residual stresses into account, but the results demonstrated that this effect was not significant.     

Suitability,efficiency and microbiological safety of novel physical technologies for the processing of ready‐to‐eat meals,meats and pumpable products

Consumer studies and market reports show an increase in consumption of ready‐to‐eat (RTE) foods. Although conventional processing technologies can in most cases produce safe products, they can also lead to the degradation of nutritional compounds and negatively affect quality characteristics. Consumers strongly prefer food that is minimally processed with the maximum amount of health‐promoting substances. Novel processing technologies as pre‐ or post‐treatment decontamination methods or as substitutes of conventional technologies have the potential to produce foods that are safe, rich in nutrient content and with superior organoleptic properties. Combining novel with conventional processes can eliminate potential drawbacks of novel technologies. This review examines available scientific information and critically evaluates the suitability and efficiency of various novel thermal and nonthermal technologies in terms of microbial safety, quality as well as nutrient content on the production of RTE meals, meats and pumpable products.     

Remaining useful life prediction for degrading systems with random shocks considering measurement uncertainty

Degradation data have been widely used for the remaining useful life (RUL) prediction of systems. Most existing works apply a preset model to capture the degradation process and focus on the degradation process without shocks or constant shock effects. More generally, the actual degradation path is unobservable due to the existence of measurement uncertainty, which interferes with the determination of the degradation model. Besides, the effect of random shocks is usually fluctuating. Given these problems, a general degradation model with the random shock fluctuant effects considering the measurement uncertainty is first developed to describe the degradation process, and a two-step approach combining the arithmetic average filter and the Bayesian information criterion is adopted to identify the degradation path. Subsequently, the transfer processes of the actual degradation state and the abrupt change caused by shocks are depicted using a two-dimensional state-space model, and an expectation-maximization algorithm combined with the particle filtering is developed for parameter estimation. Furthermore, the explicit solution of RUL distribution is obtained when only considering harmful shocks, while a simulation method of RUL distribution is provided when both harmful and beneficial shocks exist. Finally, the effectiveness of the proposed method is verified by a numerical example and two practical case studies.     

Modeling,design, and optimization of a cost‐effective and reliable hybrid renewable energy system integrated with desalination using the division algorithm

People in the Middle East are facing the problem of freshwater shortages. This problem is more intense for a remote region, which has no access to the power grid. The use of seawater desalination technology integrated with the generated energy unit by renewable energy sources could help overcome this problem. In this study, we refer a seawater reverse osmosis desalination (SWROD) plant with a capacity of 1.5 m³/h used on Larak Island, Iran. Moreover, for producing fresh water and meet the load demand of the SWROD plant, three different stand‐alone hybrid renewable energy systems (SAHRES), namely wind turbine (WT)/photovoltaic (PV)/battery bank storage (BBS), PV/BBS, and WT/BBS are modeled and investigated. The optimization problem was coded in MATLAB software. Furthermore, the optimized results were obtained by the division algorithm (DA). The DA has been developed to solve the sizing problem of three SAHRES configurations by considering the object function's constraints. These results show that this improved algorithm has been simpler, more precise, faster, and more flexible than a genetic algorithm (GA) in solving problems. Moreover, the minimum total life cycle cost (TLCC = 243 763$), with minimum loss of power supply probability (LPSP = 0%) and maximum reliability, was related to the WT/PV/BBS configuration. WT/PV/BBS is also the best configuration to use less battery as a backup unit (69 units). The batteries in this configuration have a longer life cycle (maximum average of annual battery charge level) than two other configurations (93.86%). Moreover, the optimized results have shown that utilizing the configuration of WT/PV/BBS could lead to attaining a cost‐effective and green (without environmental pollution) SAHRES, with high reliability for remote areas, with appropriate potential of wind and solar irradiance.     

03Cr18NiMoN节镍双相不锈钢的热变形行为及热加工图

关键词：双相不锈钢； 流变曲线； 本构方程； 热加工图     

The effect of intradialytic exercise twice a week on the physical capacity,inflammation, and nutritional status of dialysis patients: A randomized controlled trial

Introduction: Inactivity, uremia, and malnutrition in dialysis patients may lead to decreased muscle mass and physical capacity. As a preventative measure, dialysis patients are provided with an intradialytic exercise program. Our study aimed to determine the role of intradialytic exercise performed 2 times per week on physical capacity, inflammation, and nutritional status in dialysis patients and to determine which exercises are more suitable for this population. Methods: A randomized clinical trial in which participants were randomly assigned to 1 of 3 groups, i.e., a group of patients performing aerobic exercise, a group of patients performing a combination of aerobic and resistance exercise and the control group. The study was conducted at the Dialysis Unit of Dr. Cipto Mangunkusumo General Hospital, Jakarta for 12 weeks from February to May 2018. The inclusion criteria were dialysis patients aged over 18 years who had undergone routine dialysis for over 3 months. Findings: A total of one hundred twenty patients were included in the study. There was a significant increase in lower extremity strength in the group performing aerobic exercise and in the combined exercise group compared to the lower extremity strength of the control group. There was also a significant increase in the physical component score (PCS) of the KDQOL‐SF? instrument in the aerobic training and combination exercise groups compared to the PCS of the control group. No significant differences were found between the combination exercise group and the aerobic training group in any outcome. Discussion: Both types of exercise programs significantly increased the lower extremity muscle strength and the PCS of the quality of life index. Combination exercise was not more effective than aerobic exercise for dialysis patients.     

基于双应力加速寿命试验的关节轴承寿命预测与可靠性分析

自润滑关节轴承寿命主要是由衬垫的磨损性能决定的,但衬垫的磨损一般是非线性的,使得寿命难以预测。采用同时改变载荷和摆频2种应力的方法进行加速寿命试验,建立以pv值、磨损量退化数据为输入参数,寿命值为输出参数的灰色神经网络预测模型。经验证该预测模型对关节轴承寿命预测的最大误差仅为7.33%,平均误差仅为3.892%。对不同加速应力下自润滑关节轴承可靠性进行评估,结果表明,关节轴承的可靠性在L_(10)(可靠度为90%时的寿命)之前下降趋势缓慢,然后迅速下降,pv值越大可靠性下降越迅速;随着pv值的增大,关节轴承寿命近似呈指数下降,经验证可用逆幂率加速模型反映二者关系。